Ata Fluid A44
Ata Fluid A44 is an excellent defoam and anticorrosive concentrated liquid used for the conditioning of water-based magnetic particles suspensions.
About the Ata Fluid A44
Ata Fluid A44 is an excellent defoam and anticorrosive concentrated liquid used for the conditioning of water-based magnetic particles suspensions. It prevents the formation of algae and bacterial colonies. Intended NDT method: magnetic particle inspection. CGM states compliance with AS 4792. Published packaging: 10 L cans, 200 L metal drums.
- Easy to use
- Excellent defoam characteristics
- Excellent surface wetting
- Favors the dispersion of magnetic particles in the suspension
- Excellent short-term corrosion inhibition
- High anti-algae, fungicidal and antibacterial capacity
Technical data
- Appearance
- Opalescent liquid
- Dilution
- 0,5-1,0%
- pH ISO 4316
- 9
- NDT Method
- Magnetic particle inspection
- Shelf life
- 3 years at T between 5°C and 45°C
- Usage temperature
- From 5°C to 55°C
- Magnetic Particles
- K35-K40-K150-K755-K31.73
- Preliminary cleaning
- Velnet/Solnet
Values as published by CGM Cigiemme. Refer to the current technical datasheet for full conditions.
Published packaging & part numbers
| Format | CGM part number |
|---|---|
| 10 L cans | 02098050 |
| 200 L metal drums | // |
Formats as published by CGM. Product photos may show one packaging option only; units per carton are not published.
Compliance stated by CGM
- AS 4792
Where the Ata Fluid A44 is used
- Magnetic particle inspection
Product imagery
Datasheets & brochures
CGM does not publish the safety datasheet online. EMUS supplies the current SDS with every order or on request.
Related CGM products, accessories & consumables
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
CGM Cigiemme
TheAta Fluid A44 is part of the CGM Cigiemme MT/PT portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theAta Fluid A44, your parts, standards and inspection process, and the system or consumable that fits it.