Technologies · Volumetric inspection & metrology
See inside any part — without cutting it open
Industrial computed tomography reveals internal defects, verifies assemblies and measures geometry that other methods cannot reach.
Industrial CT
Industrial CT rotates a part within an X-ray beam and reconstructs a complete 3D volume from hundreds of projections. From that volume you can inspect internal defects, measure internal and external dimensions, and compare the real part against its CAD model — all without destroying the part.
Educate buyers on CT value and convert into a fit-assessment consultation.
Quality managers and engineers needing internal inspection and complex metrology.
Where this technology is used
Representative applications — your exact part and process define the right setup.
Problems this technology addresses
Internal defect detection
Locate porosity, voids, cracks and inclusions that are invisible from the outside.
Hard-to-measure geometry
Measure internal channels and complex shapes a tactile CMM cannot reach.
Assembly verification
Confirm internal components are present, positioned and intact.
CAD comparison
Compare the full part to nominal geometry and document deviations.
What you can do with it
- Non-destructive internal and external inspection
- Volumetric metrology with CAD comparison
- Porosity and defect analysis
- Reverse engineering of complex geometry
- Microfocus and high-energy CT scanners
- CT-based metrology and porosity-analysis software
- Sample fixturing and automation options
Categories only — we match the specific configuration to your application during the consultation.
Principals behind this technology
EMUS represents these manufacturers across the Balkan region — with consulting, installation, training and service.
Industries that rely on this technology
Automotive
Zero-defect quality at production speed
Learn moreAerospace
Traceable inspection for safety-critical parts
Learn moreFoundries
See inside every casting
Learn moreTool & Die
Precision that protects every part you make
Learn moreResearch & Laboratories
Instruments and partnership for advanced work
Learn moreChallenges this technology helps solve
See how this technology fits into a complete inspection approach for real manufacturing problems.
Internal Defect Detection
Find porosity, voids, cracks and inclusions inside parts non-destructively.
Learn moreDimensional Inspection
Verify complete geometry against CAD and prove conformance fast.
Learn moreReverse Engineering
Digitize physical parts into accurate models for redesign and reproduction.
Learn moreFailure Analysis
Understand why a part failed — geometry, material and internal structure.
Learn moreLaboratory Quality Assurance
Build a traceable, capable metrology lab whose data stands up to audits.
Learn moreFrom the knowledge center
Deeper technical background to help you evaluate and specify this technology.
Industrial computed tomography explained
How volumetric X-ray CT reconstructs internal geometry and porosity for measurement and analysis.
Learn moreInspecting castings for internal porosity
Typical porosity defect modes in castings and the inspection approaches that reveal them.
Learn moreVerifying additively manufactured parts
Geometry, internal defects and material integrity considerations for metal AM components.
Learn moreCT vs optical 3D metrology
When volumetric CT outperforms full-field optical scanning — and when it does not.
Learn moreBuying industrial X-ray and CT systems
Specifications, throughput, shielding and total cost of ownership to weigh before investing.
Learn moreReducing scrap with earlier inspection
Why catching internal and dimensional defects earlier lowers cost and protects margins.
Learn moreKeeping inspection systems reliable
Preventive maintenance, environment control and lifecycle support for inspection equipment.
Learn moreThis technology in the field
Representative applications from our project work across the Balkan region.
Brochures & documentation
Official documentation for equipment built on this technology.
An engineering partner, not just a supplier
We help you decide whether this technology is the right fit — and support it for its full lifecycle.
Authorized representation
Official partnerships with 16 established manufacturers — genuine equipment, full warranty and certified spares.
100+ systems installed since 2021
Commissioned across production floors and laboratories in the Balkan region — references available on request.
Method chosen on merit
Multi-vendor freedom means we recommend the technology that fits your part, tolerances and defect type — not the only line we carry.
Local engineering, 24h response
Offices in Zagreb, Sarajevo and Belgrade. Application, installation, training and calibration handled by the same team that specified the system.
Customers evaluating Industrial CT often also consider
Adjacent inspection methods that address related manufacturing questions — worth comparing before you commit to a single technology.
Optical 3D Metrology
Optical 3D metrology captures millions of points in seconds, delivering complete dimensional insight far faster than point-by-point probing.
Learn moreSurface & finish measurementSurface Metrology
Surface metrology characterises roughness, texture and microgeometry — the properties that drive sealing, friction, wear and fatigue life.
Learn moreNon-destructive testingDigital Radiography / X-ray Inspection
Digital radiography and X-ray inspection reveal internal structure with immediate digital imaging, speeding inspection of welds, castings and assemblies while improving documentation.
Learn moreRemote visual inspectionIndustrial Videoscopy / Endoscopy
Industrial videoscopy brings high-resolution remote visual inspection to internal surfaces, bores and cavities that would otherwise require teardown.
Learn moreDiscuss your application with an EMUS engineer
Share your part, tolerances and quality goals — we'll tell you honestly whetherIndustrial CT is the right fit.
How EMUS supports Industrial CT
From installation and operator training to calibration and long-term application support, we back every technology we supply.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.