Magnetic Powder K 150
K 150 is a fluorescent atomized magnetic powder used to prepare suspensions for magnetic particle inspection – wet method.
About the Magnetic Powder K 150
K 150 is a fluorescent atomized magnetic powder used to prepare suspensions for magnetic particle inspection – wet method. K 150 can be suspended in a petroleum (oil) based liquid carrier, such as Kerosenoil, or in water with the addition of a wetting agent (such as Ata Fluid A44 or Wetting Agent A38) to improve particle mobility, the wettability of the surface and the corrosion inhibition. Especially suitable for rough or unmachined or semi-machined surfaces. The powder is characterized by particularly fluorescent pigments which allow it to be used in environments not totally darkened. K 150 is a low-sulfur and low-halogen product, in compliance with standards. Intended NDT method: fluorescent magnetic particle inspection, wet method. CGM states compliance with EN ISO 9934-2, ASME V Art. 7, ASTM E709, ASTM E1444, AMS 3044, MIL-STD-271, MIL-STD-1949, NAVSEA 250-1500-1, PMUC (certificate of compliance upon request). Published packaging: 1 kg jar.
- It can be suspended in oil or water
- Excellent sensitivity
- Good fluorescent contrast
- Good particle mobility
- Long-lasting particles
- Easily dispersible
Technical data
- Appearance
- Dark green
- Color under UV light
- Emerald green
- Average particle size
- 12 μm
- NDT Method
- Fluorescent magnetic particle inspection, wet method
- Shelf life
- 3 years at T between 5°C and 45°C, in a dry place safe from direct sunlight
- Usage temperature
- < 48°C
- Suspension vehicle
- Kerosenoil or water
- Wetting agent for water baths
- Ata Fluid A44 or Wetting Agent A38
- Preliminary cleaning
- Velnet/Solnet
- Recommended accessories according to standards ASTM E1444 ASTM E709 EN ISO 9934-2
- Sedimentation glass tube – Magnetic Stripe Card Type 2000 – Reference Block Type I / MTU Test – Reference Block Type II – Flexible Laminated Strips – Tool Steel Ring AS 5282 Type and Ketos 01 Type – Octagonal flat plate
Values as published by CGM Cigiemme. Refer to the current technical datasheet for full conditions.
Published packaging & part numbers
| Format | CGM part number |
|---|---|
| 1 kg jar | 01024050 |
Formats as published by CGM. Product photos may show one packaging option only; units per carton are not published.
Compliance stated by CGM
- EN ISO 9934-2
- ASME V Art. 7
- ASTM E709
- ASTM E1444
- AMS 3044
- MIL-STD-271
- MIL-STD-1949
- NAVSEA 250-1500-1
- PMUC (certificate of compliance upon request)
Where the Magnetic Powder K 150 is used
- Fluorescent magnetic particle inspection, wet method
Datasheets & brochures
CGM does not publish the safety datasheet online. EMUS supplies the current SDS with every order or on request.
Related CGM products, accessories & consumables
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
CGM Cigiemme
TheMagnetic Powder K 150 is part of the CGM Cigiemme MT/PT portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theMagnetic Powder K 150, your parts, standards and inspection process, and the system or consumable that fits it.