Schiumvel
A product based on surfactants that detects gas or compressed air leaks in pipes, valves, hoses, fittings, cylinders, pressure tanks, etc.
About the Schiumvel
A product based on surfactants that detects gas or compressed air leaks in pipes, valves, hoses, fittings, cylinders, pressure tanks, etc. Non-flammable, non-polluting, non-staining, non-soiling, does not promote oxidation, and does not form combustible mixtures when in contact with gases. Applied to the surface to be checked, it instantly signals even the smallest gas leak through the formation of microbubbles. Easy to use and immediate results: it guarantees long-lasting bubbles due to its high viscosity. Intended NDT method: leak Testing. CGM states compliance with ASME Sect. V Art. 10 – Appendix I-II, EPA Part 60, Appendix A, Method 21, Sect. 4.3.3. Published packaging: 10 l cans.
- Easy to use
- Free from silicones, oils, fats, aliphatic amines, and other nitrogen compounds
- Excellent foam generation capability
- Excellent detection of both large and small leaks
- Prolonged bubble action works even on very small leaks and vertical surfaces
Technical data
- Appearance
- Colorless transparent liquid
- Density at 20°C
- ≈1,0 g/cm3
- Solubility
- Water
- NDT Method
- Leak Testing
- Shelf life
- 3 years at T between 5°C and 45°C
- Usage temperature
- From 4°C to 52°C
- Dilution
- 30-50%
- Preliminary cleaning
- Velnet/Solnet
Values as published by CGM Cigiemme. Refer to the current technical datasheet for full conditions.
Published packaging & part numbers
| Format | CGM part number |
|---|---|
| 10 l cans | 02098120 |
Formats as published by CGM. Product photos may show one packaging option only; units per carton are not published.
Compliance stated by CGM
- ASME Sect. V Art. 10 – Appendix I-II
- EPA Part 60, Appendix A, Method 21, Sect. 4.3.3
Where the Schiumvel is used
- Leak Testing
Product imagery
Datasheets & brochures
CGM does not publish the safety datasheet online. EMUS supplies the current SDS with every order or on request.
Related CGM products, accessories & consumables
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
CGM Cigiemme
TheSchiumvel is part of the CGM Cigiemme MT/PT portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theSchiumvel, your parts, standards and inspection process, and the system or consumable that fits it.