IRIS UT Kits
IRIS UT Kits use focused ultrasound to detect corrosion, pitting and wall thinning in ferrous and non-ferrous tubing.
Product overview
IRIS UT Kits are internal rotary ultrasonic inspection systems for examining ferrous and non-ferrous tubing. Focused ultrasonic transducers and turbines support inspection across a range of tube diameters and wall thicknesses, with corrosion, pitting and thinning as principal targets.
Transducers are available in three frequencies suited to different wall thicknesses and three focal lengths suited to different tube diameters. The turbines are designed to exploit the Ectane 2 acquisition rate across a range of rotation speeds while reducing bubble formation. Spring-loaded centering devices keep the inspection assembly centered inside the tube.
Used with Magnifi software and Ectane, the IRIS solution can be optimized for sizing deep indications by enabling or disabling UT A-scan rectification and adjusting other parameters. Full and Micro kit configurations provide different combinations of turbines, transducers, centering devices and cables; water pumps, filter units and an encoder are sold separately.
Key capabilities
Ferrous and non-ferrous inspection
Ultrasonic inspection detects corrosion, pitting and thinning in both ferrous and non-ferrous tubing.
Focused transducer selection
Three frequencies and three focal lengths accommodate different wall thicknesses and tube diameters.
Turbine design
Turbines support a range of rotation speeds and are designed to significantly reduce bubble formation.
Spring-loaded centering
Three spring-loaded arms linked in two directions maintain centering within the tube.
Removable centering devices
Except for the extra-small device, centering devices can be removed from the shaft without losing components or arm pressure.
Deep-indication sizing
Magnifi and Ectane allow UT A-scan rectification and other parameters to be adjusted to optimize sizing of deep indications.
Cable selection
Kits can be equipped with an assortment of cables for different inspection conditions.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
Focused UT Transducers
- Available frequencies
- three frequencies
- Available focal lengths
- three different focal lengths
Centering Devices
- Arm arrangement
- three spring-loaded arms linked in two directions
Full IRIS Kit
- Turbines
- 2 × turbines
- Centering devices
- 4 × centering devices
- Transducers
- 3 × transducers
- Cables
- 4 × 20 m (65.62 ft) cables
- Flood tube adapter
- 1 × flood tube adapter
- Repair kit
- 1 × repair kit
Full IRIS Kit with Micro-Turbine
- Turbines
- 3 × turbines
- Centering devices
- 4 × centering devices
- Transducers
- 4 × transducers
- Cables
- 4 × 20 m (65.62 ft)cables
- Flood tube adapter
- 1 × flood tube adapter
- Repair kit
- 1 × repair kit
Micro IRIS Kit
- Turbine
- 1 × turbine
- Centering device
- 1 × centering device
- Transducer
- 1 × transducer
- Cable
- 1 × 20 m (65.62 ft)cables
- Full IRIS Kit: 2 turbines, 4 centering devices, 3 transducers, 4 × 20 m (65.62 ft) cables, 1 flood tube adapter and 1 repair kit.
- Full IRIS Kit with Micro-Turbine: 3 turbines, 4 centering devices, 4 transducers, 4 × 20 m (65.62 ft) cables, 1 flood tube adapter and 1 repair kit.
- Micro IRIS Kit: 1 turbine, 1 centering device, 1 transducer and 1 × 20 m (65.62 ft) cable.
- Submersible water pumps — sold separately.
- Filter units — sold separately.
- Encoder for the IRIS kit — sold separately.
- Magnifi
- Ectane
- Ectane 2
- The extra-small centering device is excluded from the stated shaft-removal capability without loss of components or arm pressure.
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Official brochures
Tubing Probe Catalog
Additional documents
Other Eddyfi products
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for IRIS UT Kits.
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.