LP 200 Automatic Grinder
Automatic Grinder
Automatic belt grinder with dust extraction and automatic sample loading for preparing spectrometric and metallographic samples.
About the LP 200 Automatic Grinder
Automatic metallographic sample preparation system
Preparation of specimes must be performed in a correct manner, quickly and with the maximum security for the operator. The specimens must be homogeneous and representative, must have a flat and grinded surface with different finishing grades depending on the material in order to minimize the factors that may affect the results especially for the trace elements.
LP 200 Automatic electric grinder, equipped with dust aspiration system, is the new automatic instrument for the preparation of metallographic samples manufactured by GNR.
It represents the ideal solution not only for those who have a large number of specimens but also for operator’s safety that can carry out the operation with totally free hands without contact with the working area.
A manual cycle operation is available to perform occasional preparation of samples whose irregular shapes would be unsuitable for automatic mode.
LP 200 Automatic electric grinder, with automatic sample loading and unloading, allows the operator to program the entire cycle depending on the type of material to be analyzed. It is possible to select the belt speed, the number of cleaning and the degree of pressure on the specimen.
The most common materials are Fe, Cu, Al, Co and others.
Technical data
- Power Supply
- 380 /400 Vac, 3f + T, 50/60 Hz
- Max Power
- 4.3 Kw
- Air Pressure Inlet
- 4.0 bar
- Minimum working pressure
- 1.8 bar
- Dimensions
- cm 125x63x136
- Weight
- 252 Kg
- Abrasive belt
- cm 20×175 cm Red Ceramic
- Maximum sample size in automatic
- 12
Reproduced from official GNR product information. Values apply to the configuration described by GNR; final configuration is confirmed in the EMUS quotation.
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
GNR Analytical Instruments
TheLP 200 Automatic Grinder is part of the GNR Analytical Instruments portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theLP 200 Automatic Grinder, your materials and the analytical configuration that fits your laboratory or production line.