Automatic Feeding Machine for Rollers
With the advancement of industrial automation, automatic feeding machines are widely used in the bearing industry.
About the Automatic Feeding Machine for Rollers
With the advancement of industrial automation, automatic feeding machines are widely used in the bearing industry. Driven by a motor transmission mechanism, the machine feeds rollers to automatic inspection equipment without causing secondary damage. Its speed exceeds 10,000 pc/hour, significantly improving inspection efficiency and automation levels.
Documented functions: handling, packaging & line integration. Defect types, inspection ranges, speeds and optical resolution in the specification table are quoted from K2 TECH; optical resolution describes the imaging system and is not a measurement accuracy unless stated as such.
Final detection capability depends on part condition, presentation, cycle time and the agreed defect catalogue; EMUS validates these with K2 TECH using sample parts before quotation.
- Independent PatentOur auto feeder machine has two patents.
- Intelligent FeedingPaired with AOI machine and washing and drying machine, it realizes automatic inspection.
- High Efficiency with Energy ConservationWith a simple structure, the maintenance cost is low.
Technical data
- Application
- It realizes roller automatic feeding and the speed is more than the 10,000 pcs per hour without causing any secondary damage.
- Size
- Ø 5-10mm, Ø 7-13mm
- Model
- Divide by OD
- Speed
- ≥10,000pcs/h
- Voltage
- 220V,50HZ
- Feed Port Height
- 1380mm
- Power
- 1000w
- Discharge Port Height
- <=800mm
- Detecting Relative Humidity
- <70%Rh
- Mean Time to Failure
- 10000H
- Detecting Ambient Temperature
- 5℃~ 30℃
- Size/Weight
- 700mm * 530mm * 1380 mm / 100KG
Data from official K2 TECH product information. Final configuration is confirmed in the EMUS quotation.
Product imagery
Brochures, datasheets & catalogues
AOI machines for bearings — catalogue (2024-11)
PDF · Catalogue
Related K2 TECH products
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
K2 TECH
TheAutomatic Feeding Machine for Rollers is part of the K2 TECH portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theAutomatic Feeding Machine for Rollers, your parts and tolerances, and the configuration that fits your inspection workflow.