Bainpol SA
Model: PMV012
Semi-automatic single-disc polisher with powered head holding three specimens.
About the Bainpol SA
The Bainpol SA is a semi-automatic grinding and polishing machine with an independently powered head holding up to three mounted specimens. A 0.5 HP high-torque motor with imported drive gives 50–600 rpm disc speed, and the disc can run clockwise or counter-clockwise.
- Auto head to hold 3 samples
- 0.5 HP high torque motor
- Independent powered polish head
- Variable speed 50-600 rpm
- Head speed 100 rpm
- Imported AC Drive
- LCD Display
- Feather touch control
- 12" disc standard (10" optional)
- Metric mould option 30,40,50 mm
Technical data
- Auto head to hold
- 3 samples
- Speed
- 50-600 rpm
- Head speed
- 100 rpm
- Metric moulds
- 30,40,50 mm
- Holds
- upto 3 moulds – 1¼ / 1 ½, 2”, 30mm, 40mm, 50mm Dia
- Speed
- 50- 600 RPM
- Machine size
- 435 x 750 x 520 mm
- Machine Color
- Glossy Grey
Data from official Chennai Metco product information. Final configuration is confirmed in the EMUS quotation.
Available options
- Specimen Holder 1”
- Specimen Holder 1 ½”
- Specimen Holder 2”
- Specimen Holder 30mm
- Specimen Holder 40mm
- Specimen Holder 50mm
- Air Drier
- Magnetic substrate disc to attach to any conventional platen self adhesive backing
- Ferromagnetic carrier sheet for sand paper/cloths
- Water filtering system for city water inlet. Filtering out impurities in the water
Where the Bainpol SA is used
- Fine grinding and polishing of metallographic specimens
- Mirror-finish preparation for microstructure analysis
- Routine quality-control sample preparation
Brochures & catalogues
Bainpol SA — Brochure
PDF ·Brochure
Other Chennai Metco systems to consider
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Chennai Metco
TheBainpol SA is part of the Chennai Metco metrology portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theBainpol SA, your parts and tolerances, and the configuration that fits your inspection workflow.