TOPAZ64
TOPAZ64 combines portable 64-channel PAUT, TOFD and live FMC/TFM imaging with onboard analysis and raw A-scan recording for demanding ultrasonic inspections.
Product overview
TOPAZ64 is a portable ultrasonic inspection instrument combining a 64/128PR phased array configuration with two separate conventional UT channels at 200V. It supports code-compliant PAUT and TOFD inspections, with applications including thick welds, corrosion mapping, composites and complex components.
The instrument supports full matrix capture (FMC) or plane wave imaging (PWI) excitation with up to 64 elements and real-time total focusing method (TFM) imaging. TFM resolution reaches up to 1M points per frame, while frame rates reach up to 110 Hz at 65k points per frame. Its multi-mode capability allows two FMC acquisitions, up to four TFM reconstructions per FMC, phased array and TOFD to operate simultaneously.
Onboard UltraVision software provides focal law calculation with visual feedback, volumetric merging, measurement tools and interactive help. Raw FMC data can be saved in encoded mode, and recorded elementary A-scans can be used for subsequent TFM processing without rescanning. The software also supports 2D matrix arrays in pulse-echo, pitch-and-catch or multi-probe configurations and offers remote control.
A rugged casing without an air intake and a glove-operable multi-touch display support use in demanding environments. The instrument has hot-swappable batteries and 256 GB SSD storage, with operation specified from -10°C to 45°C (14°F to 113°F).
Key capabilities
64-channel PAUT
A 64/128PR phased array configuration works alongside two separate conventional UT channels at 200V.
Live TFM imaging
Real-time TFM delivers up to 1M points per frame or up to 110 Hz at 65k points per frame.
Simultaneous inspection modes
Two FMC acquisitions with up to four TFM per FMC can run alongside phased array and TOFD.
Raw data recording
Raw FMC data can be saved in encoded mode for record keeping or subsequent TFM processing without rescanning.
Bipolar pulsers
150Vpp bipolar pulsers provide additional energy for penetration through thick components.
Onboard analysis
UltraVision includes focal law calculation, volumetric merging, measurement tools and interactive help.
Glove-operable display
The 307 mm (12.1 in) high-resolution multi-touch display can be operated with gloves.
Rugged construction
The casing has no air intake and is designed for demanding environments.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
INSTRUMENT
- Dimensions (W × H × D)
- 278 × 343 × 158 mm (10.9 × 13.5 × 6.2 in)
- Weight (with 1 × battery)
- 9.1kg (20.0 lb)
- Multi-touch Display
- 307 mm (12.1 in) wide, 1024 x 768 pixels
- Air Intake
- No
- Hot Swappable Batteries
- Yes
- Storage
- 256 GB SSD
- Instrument Calibration
- Compliant with ISO 18563-1 / EN 12668-1
ENVIRONMENT
- IP rating
- Designed for IP66
- Operating Temperature Range
- -10°C to 45°C (14°F to 113°F)
- Storage Temperature Range
- -40°C to 70°C (-40°F to 158°F)
- Relative Humidity
- 80% non-condensing
CONNECTIVITY
- Phased Array Connector
- ZPAC
- Video Output
- HDMI
- Data Interfaces
- Ethernet 1000 Base-T; 1 x USB 3.0; 3 x USB 2.0
PHASED ARRAY
- Phased Array Channels
- 64/128PR
- UT Channels
- 2 P/E or 2 P/C
- Amplitude Resolution
- 16-bits
- Measurement Gates
- 4 + 1 synchronization gate (peak, crossing, autocrossing)
- Maximum PRF
- < 40 kHz
- Data Compression
- 1, 2, 4, 8, 16
- Max. Applied Voltage (50 ohms)
- 150Vpp PA UT (Bipolar) /75V (Unipolar) / 200V UT
- Bandwidth (-3 dB)
- 0.5 to 18 MHz PA; 0.5 to 25 MHz UT
- Rectification
- Digital
- Maximum Data File Size
- 2 GB; Unlimited for raw A-Scan data
- Encoder Interfaces
- 3 quadrature-type
- Filtering
- Analog / Digital (FIR)
- Smoothing (Video Filter)
- Digital
- Self-Check
- Yes
- Automated Probe Detection
- Yes (with Eddyfi Technologies' probe ID chip)
- Focal Laws
- 1024 with unlimited groups
- TFM Frame Size
- Up to 1M points
- TFM Frame Rate
- Up to 110 Hz (65k points per frame resolution)
- Maximum Number of Samples
- 16,384
Inspection capabilities
- FMC or PWI excitation
- up to 64 elements
- Simultaneous multi-mode capability
- two FMC acquisitions, up to 4 TFM per FMC, + PA + TOFD all at the same time
Software
- Matrix array support
- 2D matrix arrays in pulse echo, pitch & catch, or multi-probe configurations
- Onboard UltraVision software
- UltraVision
- UltraVision Touch
- Operating temperature: -10°C to 45°C (14°F to 113°F).
- Storage temperature: -40°C to 70°C (-40°F to 158°F).
- Relative humidity: 80% non-condensing.
- IP rating is stated as designed for IP66.
- Automated probe detection requires Eddyfi Technologies' probe ID chip.
- TFM frame rate of up to 110 Hz applies at 65k points per frame resolution.
- Maximum data file size is 2 GB, except raw A-Scan data, which is unlimited.
- Raw FMC data saving is specified in encoded mode.
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Typical applications
- Code-compliant thick weld inspection
- Corrosion mapping
- Composite inspection
- Complex component inspection
- Aircraft and aerospace NDT
- Train axle inspection
- Wet hydrogen sulfide damage inspection
- High temperature hydrogen attack inspection
- Carbon steel weld inspection
- Boiler tube weld inspection
- Austenitic steel weld inspection
Product imagery
Product videos
Official brochures
Train Axle Inspection Applications Brochure
Wet Hydrogen Sulfide Damage Applications Brochure
High Temperature Hydrogen Attack (HTHA) Applications Brochure
Corrosion Mapping Applications Brochure
Advanced Weld Inspection for Carbon Steel Applications Brochure
Advanced Weld Inspection for Austenitic Steel Applications Brochure
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for TOPAZ64.
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.