Baincut HSS
Model: CMHSS049
High-speed precision cut-off machine with variable 100–4000 rpm spindle, automatic Y-movement and 7" touch screen; capacity up to 40 mm.
About the Baincut HSS
The Baincut HSS is a precision section saw for cutting all types of materials with a continuously variable spindle speed of 100–4000 rpm. Automatic longitudinal (Y) movement, variable feed rates and automatic cut-off make it well suited to slicing surface-engineered components and other hard or sensitive specimens, and it is a frequent choice in research laboratories. A rotating vise increases the usable cutting depth.
- Cutting capacity upto 40 mm dia
- Rotating vise can increase cutting depth
- Re-circulation coolant system
- Automatic Y-movement ( Longitudinal)
- Variable speed system 100-4000 rpm
- Variable feed rates and cutting length
- Power single phase 1 HP : 220V/50Hz or 110V/60Hz
- Machine size: 810 x 810 x 550 mm (L X B X H)
Technical data
- Cutting capacity
- upto 40 mm dia
- Speed
- 100-4000 rpm
- Power single phase
- 1 HP : 220V/50Hz or 110V/60Hz
- Machine size
- 810 x 810 x 550 mm (L X B X H)
- Cutting capacity
- up to 40 mm
- Speed
- 100-4000rpm
- X Movement
- upto 50 mm
- Wheel diameter range
- Min 3″ to Max 8″ (Wheel Dia)
- Electrical
- 230 V, 50 Hz ( 1 + N + E )
- Machine size
- 810mm x 810mm x 550mm (LxBxH)
- Machine Color
- Enclosures RAL 7040, Base & Stand RAL 7016
Data from official Chennai Metco product information. Final configuration is confirmed in the EMUS quotation.
Available options
- Door Safety Interlock System
- Loto Switch & Tag Out
Where the Baincut HSS is used
- Precision sectioning of small, hard and delicate specimens
- Surface-engineered and coated components
- Ceramics, composites and electronic parts
- Research and failure-analysis laboratories
Brochures & catalogues
Baincut HSS — Brochure
PDF ·Brochure
Other Chennai Metco systems to consider
How EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Chennai Metco
TheBaincut HSS is part of the Chennai Metco metrology portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theBaincut HSS, your parts and tolerances, and the configuration that fits your inspection workflow.