Solutions
Prove the part matches the drawing — completely and fast
Point-by-point measurement is slow and samples only a few features. We help you capture complete geometry and prove conformance to your customers.
Dimensional Inspection
Complex parts must meet tight tolerances across many features, including freeform surfaces and internal geometry. Tactile measurement is slow and partial, and first-article inspection deadlines leave little margin for repeated probing.
Dimensional non-conformance leads to assembly problems, rejected lots and lost programs. Fast, full-field verification accelerates first-article approval, supports capability studies and gives customers documented proof of conformance.
Approaches worth considering
There is rarely a single right answer. These are the methods most relevant to this challenge — the best choice depends on your part and goals.
Optical 3D metrology
Full-field structured-light scanning with colour-map CAD comparison in a fraction of CMM time.
CT metrology
Measure internal and external geometry that tactile probes cannot reach.
Surface metrology
Verify finish and microgeometry alongside dimensional features.
First-article & series inspection
Documented FAI and ongoing series verification with capability data.
The technologies behind these methods
Explore each technology in depth — what it does, where it's used and the equipment categories involved.
Optical 3D Metrology
Optical 3D metrology captures millions of points in seconds, delivering complete dimensional insight far faster than point-by-point probing.
Learn moreVolumetric inspection & metrologyIndustrial CT
Industrial computed tomography reveals internal defects, verifies assemblies and measures geometry that other methods cannot reach.
Learn moreSurface & finish measurementSurface Metrology
Surface metrology characterises roughness, texture and microgeometry — the properties that drive sealing, friction, wear and fatigue life.
Learn morePrincipals behind this solution
Established manufacturers whose equipment we supply and support across the Balkan region for this challenge.
Systems used for this challenge
Illustrative systems from our portfolio. The right configuration is matched to your part, tolerances and production rate.
µCMM NEO
Purely optical coordinate measuring machine that captures dimension, position, form and roughness in one platform and a single measurement run across five precision axes.
Learn moreInfiniteFocus
Accurate, fast and universal optical 3D measuring instrument that measures form and roughness with only one optical sensor, in the µm and sub-µm range.
Learn moreFocusX
The most versatile optical 3D measuring system in its class — measures dimension, position, shape and roughness with one optical sensor, contact-free.
Learn moreInfiniteFocusSL
Cost-efficient optical 3D measurement system for easy, fast and traceable measurement of form and finish on micro-structured surfaces with only one system.
Learn moreSensorR25
Optical measurement sensor for automated form and roughness measurement on the shop floor, delivering repeatable, traceable results in the µm and sub-µm range.
Learn morePortableRL
Mobile 3D measurement system for quality assurance of micro-structured surfaces on large components — flexible use and mobile positioning wherever needed.
Learn moreProfiler
Handheld 3D optical profilometer for high-resolution surface roughness measurement of flat and curved components — profile-based (ISO 4287) and areal (ISO 25178).
Learn moreEdgeMaster series
Automatic cutting tool measurement systems for high-resolution, fully automatic measurement of tool cutting edges — in the measuring room or on the shop floor.
Learn moreCollaborative Robots
Collaborative optical 3D measurement sensor with a 6-axis robotic arm — verifies surface quality and dimensional accuracy of small features on large components.
Learn moreWhere this challenge shows up most
What manufacturers usually ask us
If any of these sound familiar, a short conversation will save you a lot of trial and error.
You may also need
Other manufacturing challenges that overlap with this one — often addressed in the same inspection programme.
Surface Measurement
Quantify roughness, texture and microgeometry on functional surfaces.
Learn moreReverse Engineering
Digitize physical parts into accurate models for redesign and reproduction.
Learn moreLaboratory Quality Assurance
Build a traceable, capable metrology lab whose data stands up to audits.
Learn moreFailure Analysis
Understand why a part failed — geometry, material and internal structure.
Learn moreInternal Defect Detection
Find porosity, voids, cracks and inclusions inside parts non-destructively.
Learn moreIncoming Material Inspection
Catch non-conforming material at goods-in, before it enters production.
Learn moreFrom the knowledge center
Deeper technical background to help you evaluate and specify the right approach.
Industrial computed tomography explained
How volumetric X-ray CT reconstructs internal geometry and porosity for measurement and analysis.
Learn moreOptical 3D metrology fundamentals
Structured-light and photogrammetry principles for fast, full-field dimensional measurement.
Learn moreInspecting castings for internal porosity
Typical porosity defect modes in castings and the inspection approaches that reveal them.
Learn moreVerifying additively manufactured parts
Geometry, internal defects and material integrity considerations for metal AM components.
Learn moreCT vs optical 3D metrology
When volumetric CT outperforms full-field optical scanning — and when it does not.
Learn morePAUT vs TOFD for weld inspection
How phased array and time-of-flight diffraction compare for detecting and sizing weld defects.
Learn moreThis challenge in the field
Representative applications from our project work across the Balkan region.
An engineering partner, not a product catalogue
We match measurement technology to your geometry, tolerances and cycle time, and validate capability so the data holds up to audits.
We start with your problem
We assess your part, defect type, tolerances and throughput before recommending any method — never the other way around.
Method-neutral advice
Because we represent multiple established manufacturers, we recommend the most suitable approach, not the only one we carry.
Complete project support
Consulting, installation, training, calibration and long-term service across the full equipment lifecycle.
Local technical support
Engineering support and communication across our markets in the Balkan region.
How EMUS supports dimensional inspection
Application review, installation, training and calibration delivered by the same engineering team that specifies the equipment.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Discuss yourdimensional inspection challenge
Tell us about your part, defect or quality goal. We'll help you choose the right inspection approach fordimensional inspection.