Scanners and Accessories
Manual scanning, position encoding and calibration accessories support Eddyfi surface ECA probe deployment on pipes, tubes and other inspection applications.
Product overview
This accessory family supports Eddyfi surface eddy current array (ECA) inspections through manual probe deployment, position encoding and application-specific calibration. The Universal I-Flex™ Manual Pipe Scanner is designed specifically to simplify the use of I-Flex ECA probes on tubes and pipes.
The Standard ECA Probe Encoder adds high-resolution position encoding to any Eddyfi standard surface ECA probe. Its tool-free click-on attachment simplifies installation, while connector configurations serve Ectane® 2 and Reddy®. A waterproof design, aluminum casing and replaceable wheel support practical handling and maintenance.
The calibration reference plates provide indications for setting up probes to suit a particular application, including corrosion and weld inspection. Standards are adapted to probe penetration, coverage and defect sizes, with EDM notches representing crack-like indications and Flat-Bottom Holes representing volumetric indications. Material and thickness depend on the model, and custom indications can be requested.
Key capabilities
Manual pipe scanning
The Universal I-Flex™ Manual Pipe Scanner simplifies deployment of I-Flex ECA probes on tubes and pipes.
High-resolution encoding
The Standard ECA Probe Encoder provides 25.46 counts/mm (646.76 counts/in) resolution.
Tool-free attachment
The click-on encoder fits all Eddyfi standard surface ECA probes without installation tools.
Instrument-specific connectors
The encoder supports an 18-pin connector for Ectane® 2 and a 12-pin connector for Reddy®.
Rugged construction
The encoder has a rugged aluminum casing, a waterproof design and an easy-to-clean construction.
Replaceable wheel
The encoder wheel can be replaced by the user.
Application-adapted standards
Calibration standards address probe penetration, coverage and defect sizes for corrosion, welds and other applications.
Reference indication types
Calibration plates use EDM notches for crack-like indications and Flat-Bottom Holes (FBH) for volumetric indications.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
Standard ECA Probe Encoder
- Resolution
- 25.46 counts/mm (646.76 counts/in)
- Cable length
- 3 m (9.8 ft)
- Casing
- Rugged aluminum casing
- Environmental design
- Waterproof design
Standard ECA Probe Encoder — Ectane® 2
- Connector
- 18-pin connector
Standard ECA Probe Encoder — Reddy®
- Connector
- 12-pin connector
Calibration Standards
- Materials
- aluminum, stainless steel, and carbon steel
- Thickness
- Thicknesses varying between 3.18 mm (0.13 in) and 6.35 mm (0.25 in), depending on model
- Crack-like reference indications
- EDM notches for crack-like indications
- Volumetric reference indications
- Flat-Bottom Holes (FBH) for volumetric indications
- Universal I-Flex™ Manual Pipe Scanner
- Standard ECA Probe Encoder
- Calibration Standards
- Custom calibration indications upon request
- I-Flex ECA probes
- Eddyfi standard surface ECA probes
- Ectane® 2
- Reddy®
- Calibration standard thickness depends on the model.
- Custom calibration indications are available upon request.
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Product imagery
Product videos
Official brochures
ECA Surface Probe Catalog
Additional documents
Other Eddyfi products
Alternatives from other manufacturers
Comparable systems we also represent. If your application requires a different balance of speed, resolution or footprint, these are worth reviewing.
Structure & Hardness Test Instruments
ibg's family of digital eddy-current instruments for 100% comparative verification of heat treatment, hardness, case depth and material mix-ups on mass-produced steel parts.
Compareibg NDT TechnologyeddyQlab Ai
Laboratory system that uses eddy-current data and a pre-trained AI model to predict case depth and surface hardness of induction-hardened parts such as CV joints.
Compareibg NDT TechnologyeddyQlab Ai VL
Semi-automated, one-button lab system for CV joints that predicts surface hardness and case depth non-destructively using AI and machine learning.
Compareibg NDT Technologyeddyguard neo S
Next-generation eddy-current controller for microstructure testing, built for easy machine integration, Industrial Ethernet connectivity and multi-device control.
CompareHow EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for Scanners and Accessories.
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.