eddyguard neo S
Model: eddyguard neo® S
Next-generation eddy-current controller for microstructure testing, built for easy machine integration, Industrial Ethernet connectivity and multi-device control.
About the eddyguard neo S
The eddyguard neo S is ibg's newest structure-test controller. It is designed for machine builders and plants that need ECT controllers integrated tightly into automation and data systems: Industrial Ethernet connects it to production systems, up to 25 controllers can be run from one user interface, and inspection results are traceable.
Testing uses iPMFT with eight sequenced test frequencies plus two simultaneous harmonics, combined with good-part teaching. ibg lists an Ai ADVANCED version for hardness prediction; as with all ibg structure tests, set-up relies on correct reference parts and a coil suited to the part geometry.
Eddy-current structure testing is comparative: the instrument learns tolerance zones from known good, correctly heat-treated reference parts and reports whether each part matches that reference. It does not output an absolute hardness value or a direct case-depth measurement; parts that fail should be examined metallurgically or with a conventional hardness test to establish the cause.
- higher detection sensitivity
- modern and intuitive user-interface
- radically easy-to-integrate
- multi-device and remote control
- advanced traceability
- rugged housing
- Ai ADVANCED version: hardness prediction for best-in-class performance and usability for structure testing
- Good-Part-Teaching
- Preventive Multi-Frequency Testing by ibg (iPMFT) in combination with and Simultaneous Harmonic Analysis by ibg (iSHA)
- Eight high-speed sequenced test frequencies plus two simultaneous harmonics to detect even subtle differences in the microstructure
- The smart frequency sequencing prevents parts from becoming magnetized and actively demagnetizes them
- No need for NOK parts during setup ( however, verification with NOK master is recommended).
- Setup requires only a small number of standard teaching parts (13 to 21), representing the part category. This significantly speeds up the setup process and ensures high reliability.
- Track and trace of teaching parts and NOK parts
- Tolerance zones are automatically generated from the fingerprint of the teaching parts.
- Set-up and teaching are designed to be performed by the operator.
Where the eddyguard neo S is used
- Integration into automated test machines and production lines
- Heat-treatment and microstructure verification
- Multi-station plants managed from one interface
Product imagery
Brochures, datasheets & catalogues
eddyguard neo S brochure
PDF · Brochure
eddyguard neo S technical datasheet
PDF · Datasheet
Related ibg products
Alternatives from other manufacturers
Comparable systems we also represent. If your application requires a different balance of speed, resolution or footprint, these are worth reviewing.
MIZ-21C
MIZ-21C is the most advanced handheld eddy current instrument with surface array capability, simplifying inspection confidence for aerospace, oil & gas, manufacturing and power generation.
CompareEddyfi TechnologiesReddy
Reddy is the first portable, battery-operated system for eddy current array, eddy current tubing and MFL inspection — combining on-site acquisition, real-time C-scan imaging and one-click reporting in a rugged, sealed instrument.
CompareEddyfi TechnologiesLyft
Lyft is Eddyfi's dedicated Pulsed Eddy Current platform for corrosion assessment through insulation, fireproofing and weather jackets. The platform combines PEC and PECA technologies with SmartPULSE automation, Tau-scan analysis and real-time C-scan imaging.
CompareEddyfi TechnologiesAmigo 2
With more than three decades of proven field performance, ACFM technology has become the industry benchmark for in-service weld inspection. Amigo2 extends this legacy with increased portability, improved signal quality, enhanced productivity and modern connectivity. The platform supports conventional probes, Sensu2 array probes, underwater probes and high-temperature applications, combining hardware, Assist software and Sensu probe technologies into a complete ACFM inspection ecosystem.
CompareHow EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
ibg NDT Technology
Theeddyguard neo S is part of the ibg NDT Technology portfolio, supplied and supported by EMUS across the Balkan region.
Request Technical Consultation
Talk to an EMUS engineer about theeddyguard neo S, your parts and tolerances, and the configuration that fits your inspection workflow.