T-Flex ECA Probes
T-Flex ECA probes conform to smooth, curved surfaces for one-pass examinations of complex geometries, with 70 mm coverage and a 20 mm minimum bend radius.
Product overview
T-Flex probes are eddy current array (ECA) probes designed to follow complex geometries during one-pass examinations. Their ability to conform to smooth, curved surfaces supports inspection of pipes, nozzles, turbine blades and wheels, including applications that have traditionally been challenging for ECA.
The T-shaped layout places the coil array perpendicular to the cable exit. The probes use real coils, which the page identifies as providing better penetration than other flexible ECA probes on the market, and accept Eddyfi’s standard click-on encoder.
The family is offered only in medium size, with coverage of 70 mm (2.76 in). Published inspection limits include a minimum detectable crack length of 1.5 mm (0.06 in) and a minimum bend radius of 20 mm (0.79 in).
Key capabilities
Conforming geometry
The probes fit smooth, curved surfaces for examinations of complex shapes.
One-pass examination
The design supports one-pass examinations of pipes, nozzles, turbine blades and wheels.
Transverse array layout
The T-like design positions the array perpendicular to the cable exit.
Real-coil construction
Real coils provide better penetration compared with other flexible ECA probes on the market.
Click-on encoder compatibility
The probes are compatible with Eddyfi’s standard click-on encoder.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
GENERAL
- Coverage
- 70 mm (2.76 in)
- Minimum detectable crack length
- 1.5 mm (0.06 in)
- Minimum bend radius
- 20 mm (0.79 in)
Family
- Available size
- medium size
- Eddyfi standard click-on encoder
- Only available in medium size.
- Minimum bend radius: 20 mm (0.79 in).
- Minimum detectable crack length: 1.5 mm (0.06 in).
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Official brochures
ECA Surface Probe Catalog
Additional documents
Other Eddyfi products
Alternatives from other manufacturers
Comparable systems we also represent. If your application requires a different balance of speed, resolution or footprint, these are worth reviewing.
Structure & Hardness Test Instruments
ibg's family of digital eddy-current instruments for 100% comparative verification of heat treatment, hardness, case depth and material mix-ups on mass-produced steel parts.
Compareibg NDT TechnologyeddyQlab Ai
Laboratory system that uses eddy-current data and a pre-trained AI model to predict case depth and surface hardness of induction-hardened parts such as CV joints.
Compareibg NDT TechnologyeddyQlab Ai VL
Semi-automated, one-button lab system for CV joints that predicts surface hardness and case depth non-destructively using AI and machine learning.
Compareibg NDT Technologyeddyguard neo S
Next-generation eddy-current controller for microstructure testing, built for easy machine integration, Industrial Ethernet connectivity and multi-device control.
CompareHow EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for T-Flex ECA Probes.
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.