Sensu Topside Pencil Probes (PACE)
Sensu topside ACFM pencil probes support ferritic and austenitic weld inspection with PACE and Amigo 2, offering three orientations and scan-status LEDs.
Product overview
Sensu Topside Pencil Probes (PACE) are ACFM probes developed for topside weld inspection with the PACE instrument. The family also supports Amigo 2 and is intended for both ferritic and austenitic welds.
The probes provide 15 mm coverage, with listed operating frequencies of 5 kHz and 50 kHz. Right-angle, straight and transverse orientations offer different probe configurations, while integrated LEDs indicate scan status during inspection.
Compatible SENSU probe cables are listed in 1.5m, 5m and 15m lengths. The maximum compatible probe cable length is 15m.
Key capabilities
Topside weld inspection
Designed for inspecting ferritic and austenitic welds with PACE.
Instrument compatibility
The probe family is compatible with PACE and Amigo 2.
Three orientations
Probes come in right-angle (RA), straight and transverse configurations.
Scan-status indication
LEDs indicate scan status during inspection.
Coverage and frequencies
The family lists 15 mm coverage and frequencies of 5 kHz and 50 kHz.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
SENSU™ Pencil Probe
- Orientations
- 3 orientations (Right angle (RA), Straight, Transverse)
- Maximum compatible probe cable length
- 15m
Coverage
- Coverage
- 15 mm
Frequency
- Frequency
- 5 kHz
- Frequency
- 50 kHz
Compatible cable
- ACFM-SENSU-CABLE-1_5M
- 1.5m ACFM® SENSU® probe cable
- ACFM-SENSU-CABLE-15M
- 15m ACFM® SENSU® probe cable
- ACFM-SENSU-CABLE-5M
- 5m ACFM® SENSU® probe cable
- PACE
- Amigo 2
- ACFM-SENSU-CABLE-1_5M
- ACFM-SENSU-CABLE-15M
- ACFM-SENSU-CABLE-5M
- Maximum compatible probe cable length is 15m.
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Other Eddyfi products
Alternatives from other manufacturers
Comparable systems we also represent. If your application requires a different balance of speed, resolution or footprint, these are worth reviewing.
Structure & Hardness Test Instruments
ibg's family of digital eddy-current instruments for 100% comparative verification of heat treatment, hardness, case depth and material mix-ups on mass-produced steel parts.
Compareibg NDT TechnologyeddyQlab Ai
Laboratory system that uses eddy-current data and a pre-trained AI model to predict case depth and surface hardness of induction-hardened parts such as CV joints.
Compareibg NDT TechnologyeddyQlab Ai VL
Semi-automated, one-button lab system for CV joints that predicts surface hardness and case depth non-destructively using AI and machine learning.
Compareibg NDT Technologyeddyguard neo S
Next-generation eddy-current controller for microstructure testing, built for easy machine integration, Industrial Ethernet connectivity and multi-device control.
CompareHow EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for Sensu Topside Pencil Probes (PACE).
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.