Swift M
Swift M is a portable MFL data acquisition instrument for rapid corrosion screening and mapping of pipes and small vessels when paired with Pipescan or Pipescan HD.
Product overview
Swift M combines magnetic flux leakage (MFL) data acquisition with mapping, real-time display, onboard defect analysis, and automated reporting. Used with Pipescan or Pipescan HD, it supports rapid corrosion screening and mapping in pipe runs and small-diameter vessels.
MFL detects the volume of missing magnetic material in the inspected component. The method requires limited surface preparation and no couplant, while the page cites scanning speeds up to 1m/s (3.2 ft/s). Pipescan HD adds corrosion and pitting detection with a single curvature adjustment tool for quick setup, without complicated gate settings.
The instrument has a non-reflective multi-touch display, a magnesium alloy enclosure designed for IP65, and strengthened protective glass. Two hot-swappable lithium-ion batteries support field operation, with a typical battery life of 6–8 hours. A rear stand, top handle, and corner anchor points aid on-site handling; an optional harness supports extended use.
Recorded inspection data allows the reporting threshold to be changed after scanning to match the work scope. Operators can analyze defects during inspection, after a scan, or at job completion, then generate a report and transfer it to USB for distribution.
Key capabilities
MFL corrosion mapping
Paired with Pipescan or Pipescan HD, Swift M screens, detects, and maps corrosion in pipes and small vessels.
Real-time analysis
Real-time data display and onboard defect analysis support assessment during inspection.
Adjustable reporting threshold
Full data recording allows the reporting threshold to be adjusted after inspection.
One-click reporting
Completed analyses can be converted into reports and transferred to USB for distribution.
Field-ready construction
The magnesium alloy enclosure is designed for IP65 and incorporates strengthened display glass.
Multi-touch display
A large non-reflective display provides a clear interface for field inspections.
Hot-swappable batteries
Two included lithium-ion batteries support portable operation.
Practical handling
An adjustable rear stand, top handle, and four corner anchor points support on-site use.
Published technical specifications
Values as published by Eddyfi Technologies. Where models or variants differ, each is listed separately.
Inspection performance
- Detection
- Detection from Ø >1mm and 20% wall loss
- In-service surface temperature
- up to 60°C
MFL method
- Scanning speeds
- up to 1m/s (3.2 ft/s)
Swift M
- Dimensions (W × D × H)
- 355 × 288 × 127 mm (14.0 × 11.3 × 5.0 in)
- Weight with batteries
- 6.6 kg (14.5 lb)
- Weight without batteries
- 5.7 kg (12.5 lb)
- Volume
- 13 L (791 in3)
- Power requirements
- 100-240 VAC, 50-60 Hz
- Power supply
- Direct VAC or onboard batteries
- Batteries
- Li-ion, rechargeable, DOT compliant
- Battery life
- Typical life 6-8 hours
- Included battery configuration
- two lithium-ion, hot-swappable batteries
- Display size
- 26.4 cm (10.4 in)
- Display coating
- Non-reflective (AR coating)
- Display surface
- Anti-fingerprint (oleophobic coating)
- Display glass cover
- 3 mm (0.12 in), strenghtened glass cover
- Display construction
- Optically bonded LCD and touchscreen
- Storage
- SSD, 100 GB
- Connectivity
- Gigabit Ethernet, Wi-Fi™, Bluetooth®, USB 2.0 (×3)
- IP rating
- Designed for IP65
- Operating temperature
- 0–40°C (32–104°F)
- Operating humidity
- 95%, non-condensing
- Anchor points
- four corner anchor points
Swift M — Details
- Strengthened glass
- 3 mm (1/8 in)
- Two lithium-ion hot-swappable batteries
- Adjustable rear stand
- Top handle
- Four corner anchor points
- Harness for extended use
- Pipescan
- Pipescan HD
- Swift-M software
- Instrument operating temperature: 0–40°C (32–104°F).
- Operating humidity: 95%, non-condensing.
- In-service inspection at surface temperatures up to 60°C.
- MFL detects missing magnetic material.
- The enclosure is described as designed for IP65.
Compatibility lists only items named by Eddyfi for this product; confirm configuration with EMUS before ordering.
Product imagery
Official brochures
Cleaning Tips and Tricks
Additional documents
Alternatives from other manufacturers
Comparable systems we also represent. If your application requires a different balance of speed, resolution or footprint, these are worth reviewing.
Structure & Hardness Test Instruments
ibg's family of digital eddy-current instruments for 100% comparative verification of heat treatment, hardness, case depth and material mix-ups on mass-produced steel parts.
Compareibg NDT TechnologyeddyQlab Ai
Laboratory system that uses eddy-current data and a pre-trained AI model to predict case depth and surface hardness of induction-hardened parts such as CV joints.
Compareibg NDT TechnologyeddyQlab Ai VL
Semi-automated, one-button lab system for CV joints that predicts surface hardness and case depth non-destructively using AI and machine learning.
Compareibg NDT Technologyeddyguard neo S
Next-generation eddy-current controller for microstructure testing, built for easy machine integration, Industrial Ethernet connectivity and multi-device control.
CompareHow EMUS supports this
Equipment is only part of the answer. Every system we supply is backed by regional engineering, service and application support.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Eddyfi Technologies
Part of the Eddyfi Technologies portfolio, represented by EMUS across the Balkan region.
Application Notes & resources
Official application notes and technical literature for Swift M.
Request an Engineering Consultation
Talk to an EMUS engineer about this product and whether it fits your inspection workflow.