Applications
Start from the inspection problem
Each application page explains the inspection problem, the methods that solve it, and where each method reaches its limit — so you can compare before you commit.
Twenty-two ways EMUS answers 'which method should I use?'
Surface Roughness Measurement
Quantify texture on surfaces where roughness controls fit, sealing, wear and fatigue life.
Explore methodsOptical Measurement of Complex Geometries
Capture full 3D geometry on parts that defeat tactile probes and comparators.
Explore methodsCutting-Tool & Cutting-Edge Measurement
Quantify cutting-edge preparation, wear and coating with repeatable optical 3D metrology.
Explore methodsIndustrial CT Inspection of Castings
Reveal internal casting defects and verify wall thickness in a single 3D scan.
Explore methodsPorosity & Inclusion Detection
Locate, size and classify internal defects in metal components.
Explore methodsWeld Inspection
Match the inspection method to the weld — code, geometry, access and defect type.
Explore methodsPAUT, TOFD & TFM Inspection
Advanced ultrasonic techniques with imaging, sizing and recorded data.
Explore methodsCorrosion Mapping
Locate and quantify wall loss on pipes, tanks and pressure equipment.
Explore methodsTube & Heat-Exchanger Inspection
Detect wall loss, pitting and cracks in tubes without pulling the bundle.
Explore methodsEddy-Current Crack Detection
Detect surface and near-surface cracks in conductive parts — manual, portable or fully automated.
Explore methodsGrinder-Burn Detection
Reveal heat damage on ground surfaces that undermines fatigue life.
Explore methodsStructure & Heat-Treatment Verification
Confirm heat treatment, structure and material identity — sample by sample or in-line.
Explore methodsMagnetic-Particle Inspection (MT)
Reveal surface and near-surface discontinuities on ferromagnetic parts.
Explore methodsLiquid-Penetrant Inspection (PT)
Reveal surface-breaking defects on almost any non-porous material.
Explore methodsOES Metal Analysis
Full elemental analysis of metals — including light elements — from melt control to laboratory.
Explore methodsXRF & PMI
Non-destructive elemental analysis — from field PMI to laboratory XRF.
Explore methodsHardness Testing
Verify hardness — sample by sample, batch by batch or in-line.
Explore methodsMetallographic Sample Preparation
From raw sample to publishable micrograph — with repeatable, traceable preparation.
Explore methodsRemote Visual Inspection (RVI)
Inspect internal, confined and inaccessible areas — without dismantling.
Explore methodsAutomated Optical Inspection (AOI)
Machine vision and AI-supported inspection for high-speed production.
Explore methodsDimensional & Video Measurement
Precision dimensional inspection with video measurement, comparators and gauging.
Explore methodsProduction-Line Automated Inspection
Keep zero-defect targets at line speed with automated NDT and vision.
Explore methodsFind the Right Inspection Solution
Tell us the part, the defect and the volume — we'll recommend the right inspection method and, if needed, the manufacturer behind it.