Solutions
Hold quality steady — at the speed of production
Quality that only shows up in the lab is too late. We help you put the right checks in the right place to detect drift before it becomes scrap.
Production Quality Control
During series production, processes drift, tools wear and defects appear. You need quality control that keeps pace with the line, catches problems early and feeds data back to the process without becoming a bottleneck.
Undetected drift turns into scrap, rework, sorting and customer rejects. Well-placed production quality control reduces cost per part, stabilises processes and provides the data needed for continuous improvement and audits.
Approaches worth considering
There is rarely a single right answer. These are the methods most relevant to this challenge — the best choice depends on your part and goals.
Optical 3D metrology
Fast dimensional checks and CAD comparison that keep up with production.
Eddy current testing
High-speed surface crack detection and material sorting in-process.
Radiography / X-ray
Fast internal inspection for castings, welds and assemblies.
Hardness & material checks
Monitor condition and composition at key process steps.
The technologies behind these methods
Explore each technology in depth — what it does, where it's used and the equipment categories involved.
Optical 3D Metrology
Optical 3D metrology captures millions of points in seconds, delivering complete dimensional insight far faster than point-by-point probing.
Learn moreNon-destructive testingEddy Current Testing
Eddy current testing finds surface and near-surface defects in conductive materials quickly and cleanly — suited to high-speed crack detection and sorting.
Learn moreNon-destructive testingDigital Radiography / X-ray Inspection
Digital radiography and X-ray inspection reveal internal structure with immediate digital imaging, speeding inspection of welds, castings and assemblies while improving documentation.
Learn moreMaterial & mechanical testingHardness Testing
Hardness testing confirms material and heat-treatment condition — a fast, established way to check mechanical properties and process consistency.
Learn morePrincipals behind this solution
Established manufacturers whose equipment we supply and support across the Balkan region for this challenge.
Bruker Alicona
Bruker Alicona — authorised representation across the Balkan region.
Learn moreCanadaEddyfi Technologies
Eddyfi Technologies — authorised representation across the Balkan region.
Learn moreGermanyibg NDT Technology
Eddy-current structure, crack and grinder-burn testing, AVIKO bearing-ball inspection and automated NDT systems from Germany.
Learn moreDenmarkComet X-ray
Comet X-ray — authorised representation across the Balkan region.
Learn moreItalyGNR Analytical Instruments
Spark optical emission spectrometers for metal analysis — plus oil analysis, sample preparation, XRD and TXRF from Italy.
Learn moreItalyAFFRI Testing Instruments
Rockwell, Brinell, Vickers and portable hardness testers with closed-loop load-cell technology from Italy.
Learn moreSystems used for this challenge
Illustrative systems from our portfolio. The right configuration is matched to your part, tolerances and production rate.
µCMM NEO
Purely optical coordinate measuring machine that captures dimension, position, form and roughness in one platform and a single measurement run across five precision axes.
Learn moreInfiniteFocus
Accurate, fast and universal optical 3D measuring instrument that measures form and roughness with only one optical sensor, in the µm and sub-µm range.
Learn moreFocusX
The most versatile optical 3D measuring system in its class — measures dimension, position, shape and roughness with one optical sensor, contact-free.
Learn moreInfiniteFocusSL
Cost-efficient optical 3D measurement system for easy, fast and traceable measurement of form and finish on micro-structured surfaces with only one system.
Learn moreSensorR25
Optical measurement sensor for automated form and roughness measurement on the shop floor, delivering repeatable, traceable results in the µm and sub-µm range.
Learn morePortableRL
Mobile 3D measurement system for quality assurance of micro-structured surfaces on large components — flexible use and mobile positioning wherever needed.
Learn moreProfiler
Handheld 3D optical profilometer for high-resolution surface roughness measurement of flat and curved components — profile-based (ISO 4287) and areal (ISO 25178).
Learn moreEdgeMaster series
Automatic cutting tool measurement systems for high-resolution, fully automatic measurement of tool cutting edges — in the measuring room or on the shop floor.
Learn moreCollaborative Robots
Collaborative optical 3D measurement sensor with a 6-axis robotic arm — verifies surface quality and dimensional accuracy of small features on large components.
Learn moreWhat manufacturers usually ask us
If any of these sound familiar, a short conversation will save you a lot of trial and error.
You may also need
Other manufacturing challenges that overlap with this one — often addressed in the same inspection programme.
Incoming Material Inspection
Catch non-conforming material at goods-in, before it enters production.
Learn moreMaterial Identification
Confirm exactly what an alloy or metal is before it reaches your process.
Learn moreWeld Inspection
Detect and size weld defects with traceable, defensible results.
Learn moreSurface Measurement
Quantify roughness, texture and microgeometry on functional surfaces.
Learn moreInternal Defect Detection
Find porosity, voids, cracks and inclusions inside parts non-destructively.
Learn moreDimensional Inspection
Verify complete geometry against CAD and prove conformance fast.
Learn moreFrom the knowledge center
Deeper technical background to help you evaluate and specify the right approach.
Industrial computed tomography explained
How volumetric X-ray CT reconstructs internal geometry and porosity for measurement and analysis.
Learn moreOptical 3D metrology fundamentals
Structured-light and photogrammetry principles for fast, full-field dimensional measurement.
Learn moreInspecting castings for internal porosity
Typical porosity defect modes in castings and the inspection approaches that reveal them.
Learn moreVerifying additively manufactured parts
Geometry, internal defects and material integrity considerations for metal AM components.
Learn moreCT vs optical 3D metrology
When volumetric CT outperforms full-field optical scanning — and when it does not.
Learn morePAUT vs TOFD for weld inspection
How phased array and time-of-flight diffraction compare for detecting and sizing weld defects.
Learn moreThis challenge in the field
Representative applications from our project work across the Balkan region.
Industrial CT for casting porosity reduction
Content will be replaced with official customer-approved case study.
Learn moreBalkan regionOptical 3D metrology for first-article inspection
Content will be replaced with official customer-approved case study.
Learn morethe Balkan regionPAUT & TOFD for traceable weld inspection
Content will be replaced with official customer-approved case study.
Learn moreAn engineering partner, not a product catalogue
We help you decide what to measure, where and how often — matching inspection to your cycle time and budget rather than over-inspecting.
We start with your problem
We assess your part, defect type, tolerances and throughput before recommending any method — never the other way around.
Method-neutral advice
Because we represent multiple established manufacturers, we recommend the most suitable approach, not the only one we carry.
Complete project support
Consulting, installation, training, calibration and long-term service across the full equipment lifecycle.
Local technical support
Engineering support and communication across our markets in the Balkan region.
How EMUS supports production quality control
Application review, installation, training and calibration delivered by the same engineering team that specifies the equipment.
Mechanical, electrical, environmental setup done right the first time.
Qualification and acceptance testing against real criteria.
Operator and application training built around your parts.
Traceable calibration to keep measurements audit-ready.
Preventive and corrective service across the Balkan region.
Method development and problem-solving with our engineers.
Discuss yourproduction quality control challenge
Tell us about your part, defect or quality goal. We'll help you choose the right inspection approach forproduction quality control.